The new homes that are being developed have pretty high standards that must be met for energy efficiency. Although, this is not the case for older homes. The easiest way to make an older home a great deal more energy efficient is to use insulation. It is not easy to try and do if you have exterior side walls but it is possible with blown-in insulation in your attic. The heat retaining material will maintain your house warmer during the winter and cooler over the summer woodworking plans. If you live in an old house, you'll find that the insulation employed is only newspapers.

These days, with all of the ecological concerns, insulation has become a discipline all by itself. Insulating materials are given an R-value, and this value is required to determine the amount of insulation needed, depending on the area of the country you live. Very cold regions have to have a considerably higher R-value, than places with moderate temperatures. Possibly the most effective treatments to reduce your heating bill is blown-in insulation. woodworking plans There are several benefits for applying this type of insulation over the standard rolls of fiberglass insulation, such as where it can be used, energy efficiency, and how it is installed.

Of the top five reasons for applying blown-in insulation, the foremost is that it is adjustable. You can change the R-value by precisely how much insulation you choose to use. In order to have an R-value of 15, you just simply blow a measured volume of insulation, in cases where you need a higher R-value, just add more insulation. Another reason that blown-in insulation would be the path to take is that the materials are usually virgin so there's less chance of allergies. Youll also end up with a better seal considering that the materials can fill in cracks and crevices. The application is fast, and since everything is filled in, it is very energy-efficient.

Applying blown-in insulation is not difficult for a newly framed house. All that you need to do is to fix a netting over the studs of the exterior wall and make a couple of small holes, then place a hose in the hole and fill up the inside with insulation. The material blown in adheres to the studs, and completely fills all of the empty spaces. Mask the walls with a vapor barrier, and drywall and you are done. To perform ceiling insulation, you drywall the ceiling first then go into the attic and blow it in from there. Its tougher with older properties for the reason that the wall covering will need to be removed. After the wall covering is got rid off, the steps are pretty much identical. If you live in a very old house, you can just make a hole in a wall and blow the insulating product in, then cover it up.

To start with, the cost of blow-in insulation is more expensive, yet it's much more efficient as an energy saver woodworking plans. With lower heating charges and a warmer home, using blown-in insulation makes the most sense.