Do you possess room that could benefit from a ceiling fan Its not really complicated to install a ceiling fan by yourself if you are planning to replace a light fixture. Since a ceiling fan requires the same electrical wiring as your light fixture, the only primary thing that requires to be done is to replace the workbox that can handle the weight of the ceiling fan. If you dont change the present workbox to something that can manage the weight could mean disaster woodworking designs. Before you begin your project, examine the directions for the fan you have purchased, and make sure that you have all of the necessary tools.

woodworking plans Should you decide to install the fan on a cathedral type ceiling, you very well may need to have parts to extend the fan lower. When you have every little thing ready to go, the very first thing you must do is make sure that the breaker is switched off so no power goes to the light fixture. After eliminating the current light fixture, verify to see if the installed workbox can tackle the weight of your ceiling fan. Normally they aren't made for a ceiling fan, so you will need to add more support. You can do this quite easily if you are able to gain access to the light fixture from the attic.

All you need to do, is nail a 2x4 between the ceiling rafters, so it touches the top of the workbox. Be sure that the 2x4 is secured and then attach on the box to the wood. If you complete it the right way, the fan should be properly supported by the 2x4. If you are not able to do it from the attic room or you have no attic, you will need to include a cross bracing in your ceiling. Doing this is far more of a challenge and may not be as reliable as using a 2x4 but it is the best you can do if you dont have access to the attic.

Once you have assembled the fan properly, you are now in a position to hang your fan. The difficult part is hooking up the wiring while keeping the fan. It will rely on the form of fan you have, many come with a bracket with a J hook while others have a clinging frame woodworking blueprints. The majority of fans, you will find a wall mount switch along with a chain to control the speed of the fan. If you select to also install a light kit with the fan, both can be operated by either chain or wall switch.

The next thing is to follow the wiring details which are as basic as hooking up two white wires, two black wires and two ground wires. Now all you need to do is complete assembling the fan according to the instructions, by connecting the fan blades. Once this is all carried out, it is time to flip the breaker back on to see if it operates.