woodworking plans Do you own a room that could make use of a ceiling fan to cool it down Its certainly not difficult to install a ceiling fan by yourself if you are planning to replace a light fixture. Since a ceiling fan requires the same electrical wiring as your light fixture, the only important thing that needs to be done is to replace the workbox that can handle the weight of the ceiling fan. Hanging your new ceiling fan on an established box that won't support the added weight of the fan could lead to disaster. Before you get started with your project, go through the guidelines for the fan you have bought, and make sure that you have all of the needed tools.

When you are setting up the fan over a cathedral ceiling, you may want to acquire additional parts for extending the fan down lower. Once you are prepared for the real installation, make sure that the breaker is switched off, so no power is going to the light you are replacing. Eliminate the light fixture, and verify if the workbox that is already there can handle the extra weight. Nearly all workboxes are not designed for ceiling fans, you will need extra support. You will be able to do this fairly easily if you are able to get the light fixture from the attic woodworking plans.

To increase support, you simply nail a 2x4 in between the ceiling rafters in order that it touches the top of the workbox. Make sure that the 2x4 is anchored and then screw on the box to the wood. If everything is performed the right way, the weight of the fan will now be absolutely supported by the wood and the screws. If you dont get admission to the attic, you will ought to place a cross bracing in your ceiling. Performing this is much more of a challenge and may not be as reliable as using a 2x4 but it is the most suitable you can do if you dont get access to the attic.

When you have put the fan together in line with the instructions, you are ready to deploy the fan to your light fixture. The challenging part is hooking up the wiring while retaining the fan. It depends on the type of fan you have, many come with a bracket with a J hook while others have a clinging frame. For most fans the wall switch will turn the unit on or off, while the chain will control the speeds. If you want a light kit with your fan, they can be monitored by either chain or wall switch.

The next step is to follow the wiring guidelines which are as simple as hooking up two white wires, two black wires and two ground wires. Now all you want to do is finish assembling the fan according to the instructions, by attaching the fan blades. woodworking plans Once this is all carried out, it is time to change the breaker back on to see if it works.